
The IMX267LQR-C is a Type 1, approximately 8.95 MP colour CMOS image sensor with square pixels for FA and ITS cameras. It combines a 4096 × 2160 recommended recording format with a global shutter and variable charge-integration time, addressing imaging tasks that require high spatial detail while capturing moving subjects.
Its main differentiating characteristic is Pregius global-shutter pixel technology. Unlike rolling-shutter acquisition, global shutter operation captures the image without focal-plane distortion or flash-band effects associated with sequential exposure. This is directly relevant to factory automation and transport imaging, where motion can otherwise compromise the geometry or timing of captured image data.
The IMX267LQR-C supports 12-bit A/D conversion and achieves 32.2 frame/s in all-pixel scan mode. It also provides 1/2 subsampling and ROI readout modes, enabling the camera design to select a reduced image region or resolution where the application does not require full-frame acquisition. Low-voltage LVDS serial output can switch between four and eight channels.
The IMX267LQR-C supports colour camera designs for factory automation and intelligent transport systems. Its global shutter is relevant when subject movement makes rolling-shutter artefacts unacceptable, while all-pixel, subsampled, and ROI readout modes support application-specific trade-offs between image area, resolution, and frame rate.
| Standard CMOS Image Sensor | |
| Sony | |
| 8.95 | |
| Global Shutter | |
| 3.45 | |
| 1.0 | |
| 17:9 | |
| 32.2 | |
| LVDS | |
| RGB | |
| Diagonal 16.1 mm (Type 1) |
| 4112 x 2176 | |
| 12-bit | |
| 32.2 fps @ 12-bit | |
| All pixel (4k2k), etc., H/V inverted | |
| IMX267LQR-C – color / IMX267LLR-C – monochrome | |
| 226 pin LGA | |
| analog 3.3 V / digital 1.2 V / interface 1.8 V | |
| Pregius | |
| all-pixel scan mode, CDS/PGA, Low voltage serial output, ROI mode, vertical/horizontal 1/2 subsampling mode, vertical/horizontal normal/inverted readout mode | |
| Active |
02
03
05
04
01








